Sign In | Join Free | My xuijs.com
China Changzhou Bextreme Shell Motor Technology Co.,Ltd logo
Changzhou Bextreme Shell Motor Technology Co.,Ltd
Professional BLDC motor products manufacturer and solution supplier!
Verified Supplier

4 Years

Home > BLDC Driver Board >

Rotating Direction Control Ports 12 to 24V Hall BLDC Driver Board

Changzhou Bextreme Shell Motor Technology Co.,Ltd
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

Rotating Direction Control Ports 12 to 24V Hall BLDC Driver Board

  • 1
  • 2
  • 3

Brand Name : JUYI

Model Number : JYQD-V7.0

MOQ : 1 set

Delivery Time : 5-10 days

Place of Origin : China

Price : Negotiable

Packaging Details : PE bag+ carton

Payment Terms : T/T,L/C,Paypal

Supply Ability : 1000sets/day

Working voltage : 12-24VDC

Working current : 2A

PWM speed control : Duty cycle 0-100% (1-20KHZ)

Speed pulse signal output : YES

Error LED : Yes

Max Current : 2A

Contact Now

JYQD-V7.0 ,12V/24VDC DC,2A working current BLDC motor driver for Hall effect BLDC motor
Model:JYQD-V7.0
Operating temperature :-20—85℃
Operating voltage: 12V/24V
Max current :3A
Continuous operating current:2A
PWM speed regulation(1-20khz) :duty cycle 0-100%
Analog voltage speed regulation :0-5V
Error LED:Yes

Application guidelines
1. Confirm that the voltage and power parameters of the motor not exceed the range as specified.
2. Applicable to hall brushless dc motor with Hall at 120°, not all manufacturers' Hall line sequence are corresponding, you can adjust the Hall line sequence or motor three-phase line sequence according to the actual situation, to achieve the best driving effect.
3. JYQD-V7.0 is driver board without housing and heatsink, it can drive the motor below 36 watt without any heatsink, but needs normal ventilation.
4. The 5V output port on the drive board is forbidden to connect external power equipment. It is only applicable to external potentiometer or switch for speed adjustment, commutation and enabling operation
Rotating Direction Control Ports 12 to 24V Hall BLDC Driver Board
Rotating Direction Control Ports 12 to 24V Hall BLDC Driver Board
Wiring diagram
Rotating Direction Control Ports 12 to 24V Hall BLDC Driver Board
1. Control port
5V —Driver board internal output voltage, external potentiometer or switch for speed adjustment and reversing operation
Z/F —Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.
VR —Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%
SC—Enable port control. Connect 5V or no connect to allow operation, connect GND to forbid operation.
GND—Used for Drive board internal control
2. Power port
MA ----motor phase A
MB ---- motor phase B
MC---- motor phase C
GND----DC-
VCC----DC +
3:Hall sensor port
Ha--- Hall a
Hb---Hall b
Hc---Hall c
GND---GND
5V---5V output
4. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.
5. Control port distance: 2.54mm,Power port distance:2.54 mm
6. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.
Dimensional drawing

Rotating Direction Control Ports 12 to 24V Hall BLDC Driver Board

DOWNLOAD JYQD-V7.0 USER MANUAL

Product Tags:

12 24V BLDC Driver Board

      

hall bldc driver board

      

hall bldc motor controllers

      
Best Rotating Direction Control Ports 12 to 24V Hall BLDC Driver Board wholesale

Rotating Direction Control Ports 12 to 24V Hall BLDC Driver Board Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Changzhou Bextreme Shell Motor Technology Co.,Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0